Warning: This document is for the development version of Geo-Python. The main version is master.

This page was generated from source/notebooks/L2/Python-basic-elements.ipynb.
Binder badge
Binder badge CSC badge

Basic elements of Python

In this lesson we will revisit data types, learn how data can be stored in Python lists, and about the concept of objects in programming.

Sources

Like the previous lesson, this lesson is inspired by the Programming with Python lessons from the Software Carpentry organization.

Note

There are some Python cells in this notebook that already contain code. You just need to press Shift-Enter to run those cells. We’re trying to avoid having you race to keep up typing in basic things for the lesson so you can focus on the main points :D.

Data types revisited

Let’s start with some data

We saw a bit about variables and their values in the lesson last week, and we continue today with some variables related to FMI observation stations in Finland. For each station, a number of pieces of information are given, including the name of the station, an FMI station ID number (FMISID), its latitude, its longitude, and the station type. We can store this information and some additional information for a given station in Python as follows:

[1]:
station_name = 'Helsinki Kaivopuisto'
[2]:
station_id = 132310
[3]:
station_lat = 60.15
[4]:
station_lon = 24.96
[5]:
station_type = 'Mareographs'

Here we have 5 values assigned to variables related to a single observation station. Each variable has a unique name and they can store different types of data.

Reminder: Data types and their compatibility

We can explore the different types of data stored in variables using the type() function. Let’s use the cells below to check the data types of the variables station_name, station_id, and station_lat.

[6]:
type(station_name)
[6]:
str
[7]:
type(station_id)
[7]:
int
[8]:
type(station_lat)
[8]:
float

As expected, we see that the station_name is a character string, the station_id is an integer, and the station_lat is a floating point number.

Note

Remember, the data types are important because some are not compatible with one another. What happens when you try to add the variables station_name and station_id in the cell below?

[9]:
station_name + station_id
---------------------------------------------------------------------------
TypeError                                 Traceback (most recent call last)
<ipython-input-9-351383cf58e2> in <module>()
----> 1 station_name + station_id

TypeError: must be str, not int

Here we get a TypeError because Python does not know to combine a string of characters (station_name) with an integer value (station_id).

Converting data from one type to another

It is not the case that things like the station_name and station_id cannot be combined at all, but in order to combine a character string with a number we need to perform a data type conversion to make them compatible. Let’s convert station_id to a character string using the str() function. We can store the converted variable as station_id_str.

[10]:
station_id_str = str(station_id)

We can confirm the type has changed by checking the type of station_id_str, or by checking the output when you type the name of the variable into a cell and running it.

[11]:
type(station_id_str)
[11]:
str
[12]:
station_id_str
[12]:
'132310'

As you can see, str() converts a numerical value into a character string with the same numbers as before.

Note

Similar to using str() to convert numbers to character strings, int() can be used to convert strings or floating point numbers to integers and float() can be used to convert strings or integers to floating point numbers.

Attention

Poll pause - Questions 2.2, 2.3

Please visit the class polling page to participate (only for those present during the lecture time).

Combining text and numbers

Although most mathematical operations operate on numerical values, a common way to combine character strings is using the addition operator +. Let’s create a text string in the variable station_name_and_id that is the combination of the station_name and station_id variables. Once we define station_name_and_id, we can print it to the screen to see the result.

[13]:
station_name_and_id = station_name + ": " + str(station_id)
[14]:
print(station_name_and_id)
Helsinki Kaivopuisto: 132310

Note that here we are converting station_id to a character string using the str() function within the assignment to the variable station_name_and_id. Alternatively, we could have simply added station_name and station_id_str.

Lists and indices

Above we have seen a bit of data related to one of several FMI observation stations in the Helsinki area. Rather than having individual variables for each of those stations, we can store many related values in a collection. The simplest type of collection in Python is a list.

Creating a list

Let’s first create a list of selected station_name values and print it to the screen.

[15]:
station_names = ['Helsinki Harmaja', 'Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula']
[16]:
print(station_names)
['Helsinki Harmaja', 'Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula']

We can also check the type of the station_names list using the type() function.

[17]:
type(station_names)
[17]:
list

Here we have a list of 4 station_name values in a list called station_names. As you can see, the type() function recognizes this as a list. Lists can be created using the square brackets [ and ], with commas separating the values in the list.

Index values

To access an individual value in the list we need to use an index value. An index value is a number that refers to a given position in the list. Let’s check out the first value in our list as an example by printing out station_names[1]:

[18]:
print(station_names[1])
Helsinki Kaisaniemi

Wait, what? This is the second value in the list we’ve created, what is wrong? As it turns out, Python (and many other programming languages) start values stored in collections with the index value 0. Thus, to get the value for the first item in the list, we must use index 0. Let’s print out the value at index 0 of station_names below.

[19]:
print(station_names[0])
Helsinki Harmaja

OK, that makes sense, but it may take some getting used to…

A useful analog - Bill the vending machine

As it turns out, index values are extremely useful, common in many programming languages, yet often a point of confusion for new programmers. Thus, we need to have a trick for remembering what an index value is and how they are used. For this, we need to be introduced to Bill.

Bill the vending machine Bill, the vending machine.

As you can see, Bill is a vending machine that contains 6 items. Like Python lists, the list of items available from Bill starts at 0 and increases in increments of 1.

The way Bill works is that you insert your money, then select the location of the item you wish to receive. In an analogy to Python, we could say Bill is simply a list of food items and the buttons you push to get them are the index values. For example, if you would like to buy a taco from Bill, you would push button 3. An equivalent operation in Python could simply be

print(Bill[3])
Taco

Number of items in a list

We can find the length of a list using the len() function. Use it below to check the length of the station_names list.

[20]:
len(station_names)
[20]:
4

Just as expected, there are 4 values in our list and len(station_names) returns a value of 4.

Index value tips

If we know the length of the list, we can now use it to find the value of the last item in the list, right? What happens if you print the value from the station_names list at index 4, the value of the length of the list?

[21]:
print(station_names[4])
---------------------------------------------------------------------------
IndexError                                Traceback (most recent call last)
<ipython-input-21-dc7905f18eab> in <module>()
----> 1 print(station_names[4])

IndexError: list index out of range

An IndexError? That’s right, since our list starts with index 0 and has 4 values, the index of the last item in the list is len(station_names) - 1. That isn’t ideal, but fortunately there’s a nice trick in Python to find the last item in a list. Let’s first print the station_names list to remind us of the values that are in it.

[22]:
print(station_names)
['Helsinki Harmaja', 'Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula']

To find the value at the end of the list, we can print the value at index -1. To go further up the list in reverse, we can simply use larger negative numbers, such as index -4. Let’s print out the values at these indices below.

[23]:
print(station_names[-1])
Helsinki Kumpula
[24]:
print(station_names[-4])
Helsinki Harmaja

Yes, in Python you can go backwards through lists by using negative index values. Index -1 gives the last value in the list and index -len(station_names) would give the first. Of course, you still need to keep the index values within their ranges. What happens if you check the value at index -5?

[25]:
print(station_names[-5])
---------------------------------------------------------------------------
IndexError                                Traceback (most recent call last)
<ipython-input-25-65170e33400a> in <module>()
----> 1 print(station_names[-5])

IndexError: list index out of range

Attention

Poll pause - Question 2.4

Please visit the class polling page to participate (only for those present during the lecture time).

Modifying list values

Another nice feature of lists is that they are mutable, meaning that the values in a list that has been defined can be modified. Consider a list of the observation station types corresponding to the station names in the station_names list.

[26]:
station_types = ['Weather stations', 'Weather stations', 'Weather stations', 'Weather stations']
print(station_types)
['Weather stations', 'Weather stations', 'Weather stations', 'Weather stations']

Let’s change the value for station_types[2] to be 'Mareographs' and print out the station_types list again.

[27]:
station_types[2] = 'Mareographs'
print(station_types)
['Weather stations', 'Weather stations', 'Mareographs', 'Weather stations']

Data types in lists

Lists can also store more than one type of data. Let’s consider that in addition to having a list of each station name, FMISID, latitude, etc. we would like to have a list of all of the values for station ‘Helsinki Kaivopuisto’.

[28]:
station_hel_kaivo = [station_name, station_id, station_lat, station_lon, station_type]
print(station_hel_kaivo)
['Helsinki Kaivopuisto', 132310, 60.15, 24.96, 'Mareographs']

Here we have one list with 3 different types of data in it. We can confirm this using the type() function. Let’s check the type of station_hel_kaivo, then the types of the values at indices 0-2 in the cells below.

[29]:
type(station_hel_kaivo)
[29]:
list
[30]:
type(station_hel_kaivo[0])    # The station name
[30]:
str
[31]:
type(station_hel_kaivo[1])    # The FMISID
[31]:
int
[32]:
type(station_hel_kaivo[2])    # The station latitude
[32]:
float

Adding and removing values from lists

Finally, we can add and remove values from lists to change their lengths. Let’s consider that we no longer want to include the first value in the station_names list. Since we haven’t see that list in a bit, let’s first print it to the screen.

[33]:
print(station_names)
['Helsinki Harmaja', 'Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula']

del allows values in lists to be removed. It can also be used to delete values from memory in Python. To remove the first value from the station_names list, we can simply type del station_names[0]. If you then print out the station_names list, you should see the first value has been removed.

[34]:
del station_names[0]
[35]:
print(station_names)
['Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula']

If we would instead like to add a few samples to the station_names list, we can type station_names.append('List item to add'), where 'List item to add' would be the text that would be added to the list in this example. Let’s add two values to our list in the cells below: 'Helsinki lighthouse' and 'Helsinki Malmi airfield'. After doing this, let’s check the list contents by printing to the screen.

[36]:
station_names.append('Helsinki lighthouse')
station_names.append('Helsinki Malmi airfield')
[37]:
print(station_names)
['Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula', 'Helsinki lighthouse', 'Helsinki Malmi airfield']

As you can see, we add values one at a time using station_names.append(). list.append() is called a method in Python, which is a function that works for a given data type (a list in this case). We’ll see some other examples of useful list mtehods below.

Appending to an integer? Not so fast…

Let’s consider our list station_names. As we know, we already have data in the list station_names, and we can modify that data using built-in methods such as station_names.append(). In this case, the method append() is something that exists for lists, but not for other data types. It is intuitive that you might like to add (or append) things to a list, but perhaps it does not make sense to append to other data types. Below, let’s create a variable station_name_length that we can use to store the length of the list station_names. We can then print the value of station_name_length to confirm the length is correct.

[38]:
station_name_length = len(station_names)
[39]:
print(station_name_length)
5

If we check the data type of station_name_length, we can see it is an integer value, as expected (do that below). What happens if you try to append the value 1 to station_name_length?

[40]:
type(station_name_length)
[40]:
int
[41]:
station_name_length.append(1)
---------------------------------------------------------------------------
AttributeError                            Traceback (most recent call last)
<ipython-input-41-69d63b22a4c2> in <module>()
----> 1 station_name_length.append(1)

AttributeError: 'int' object has no attribute 'append'

Here we get an AttributeError because there is no method built in to the int data type to append to int data. While append() makes sense for list data, it is not sensible for int data, which is the reason no such method exists for int data.

Some other useful list methods

With lists we can do a number of useful things, such as count the number of times a value occurs in a list or where it occurs. The list.count() method can be used to find the number of instances of an item in a list. For instance, we can check to see how many times 'Helsinki Kumpula' occurs in our list station_names by typing station_names.count('Helsinki Kumpula').

[42]:
station_names.count('Helsinki Kumpula')    # The count method counts the number of occurences of a value
[42]:
1

Similarly, we can use the list.index() method to find the index value of a given item in a list. Let’s use the cell below to find the index of 'Helsinki Kumpula' in the station_names list.

[43]:
station_names.index('Helsinki Kumpula')    # The index method gives the index value of an item in a list
[43]:
2

The good news here is that our selected station name is only in the list once. Should we need to modify it for some reason, we also now know where it is in the list (index 2).

Reversing a list

There are two other common methods for lists that we need to see. First, there is the list.reverse() method, used to reverse the order of items in a list. Let’s reverse our station_names list below and then print the results.

[44]:
station_names.reverse()
[45]:
print(station_names)
['Helsinki Malmi airfield', 'Helsinki lighthouse', 'Helsinki Kumpula', 'Helsinki Kaivopuisto', 'Helsinki Kaisaniemi']

Yay, it works!

Caution

A common mistake when sorting lists is to do something like station_names = station_names.reverse(). Do not do this! When reversing lists with .reverse() the None value is returned (this is why there is no screen ouput when running station_names.reverse()). If you then assign the output of station_names.reverse() to station_names you will reverse the list, but then overwrite its contents with the returned value None. This means you’ve deleted the contents of your list (!).

Sorting a list

The list.sort() method works the same way. Let’s sort our station_names list and print its contents below.

[46]:
station_names.sort()   # Notice no output here...
[47]:
print(station_names)
['Helsinki Kaisaniemi', 'Helsinki Kaivopuisto', 'Helsinki Kumpula', 'Helsinki Malmi airfield', 'Helsinki lighthouse']

As you can see, the list has been sorted alphabetically using the list.sort() method, but there is no screen output when this occurs. Again, if you were to assign that output to station_names the list would get sorted, but the contents would then be assigned None.

Note

As you may have noticed, Helsinki Malmi airfield comes before Helsinki lighthouse in the sorted list. This is because alphabetical sorting in Python places capital letters before lowercase letters.